40mm x 2mm (44mm OD) Nitrile O-Rings
40mm x 2mm (44mm OD) Nitrile O-Rings
SKU:
Couldn't load pickup availability
40mm x 2mm (44mm OD) Nitrile O-Rings
| Inner Diameter | 40.0mm |
| Outer Diameter | 44.0mm |
| Cross Section | 2.0mm |
| Tolerance (±) | 0.1mm |
Material Spec
| Material | Nitrile |
| Temperature Range | -35°C - 110°C |
| Colour | Black |
| Shore Hardness | 70A |
| Tensile Strength (MPa) | 14 |
| Elongation (%) | 430 |
| Specific Gravity | 1.23 |
| Modulus 100% Elongation (psi) | 348 |
Storage
Keep away from:
- Direct Sunlight / UV Sources
- High Voltage Electrical Equipment (Ozone Emissions)
- Extremes of heat and cold
- Excessive moisture prior to usage
All Totally Seals® products are packed and sealed at the point of manufacture to ensure the highest quality. They are stored out of sunlight and kept in a temperature controlled environment until dispatch.
Chem Compatibility
Please use our chemical compatibility tool to find out if these are suitable for your application.
Bulk Orders
If you require a larger quantity than available here please contact us with your enquiry.
We offer bulk discount with tiered pricing for larger orders or pre-packed and retail ready packets of o-rings with EAN barcodes which are available for wholesale.
Spill Monster Absorbent Powder
Eats spills. Kills germs. Swallows odours.
Have Spill Monster on hand for your next seal change, he will contain and clean up any spill in a flash, stopping contamination and nasty tumbles before they even have a chance.